transformer oil analyzer
1. testing of the dielectric strength and withstsnds volatge
2. Fully automatic
3. with printer
IIJ series fully automatic oil tester is designed as per the
requirement of IEC156 Testing Method of Insulation Oil Medium
Strength, which via proper programming, has got functions of auto
boosting, step down, stirring, display and print out. After
breakdown of oil medium, HV break off will operate within 10
seconds to enable an auto isolation of control system partly; this
effectively safeguards the personnel security and equipment safety.
The tester is suited for testing of the strength of insulating oil
medium, as well as for testing of withstands voltage of transformer
1) Fully automatic, control by microcomputer, utilization of new
2) Numbers of times of testing and idling time of stirring are set
via digital setting.
3) Test results displayed and printed out automatically.
4) Strong capability of anti-interference.
5) High accuracy of testing and high capacity of anti-jamming.
6) Easy to operate, small size, light weight which operated in the
open air very conveniently and convenient for maintenance
7) Can store 99 groups oil testing data which is convenient to
reading and print. The testing data can keep 100 years under the
condition of power off.
8) System time can go on running under power off.(the system time
just for reference can not be the standard of timing)
Technology and parameter data
1. Power supply: AC220V 10%, 50 HZ
2. Voltage output: 60 KV, 80KV, 100KV
3. Capacity: 1.6KVA, 2.0KVA
4. Pressure increase rate : About 2 KVA/S
5. Pressure testing speed: 3%
6. Break down sensitivity : <2KV
7. Wave form distortion :≤3%
8. Time of break down: ≤10ms
9. Operational environment: Temperature:0°C-40°C, Humidity: the
most relative humidity85%
10. Storage environment : Temperature:-20°C-40°C, Humidity: the
most relative humidity75%.
11. Operational height: <150m (can be specially designed if the
height is over 1500m)
12. Test cell: Glass, volume 300 to 500 ml, with protective cover
13. Electrodes: Stainless steel spherical 36 mm
diameter/hemispherical 25 mm radius, 2.5 mm gap as
What is the specification of our Transformer Insulation Oil
Breakdown Voltage Oil Tester ?
|Output Voltage||0~80KV (optional)|
|Voltage Distortion Rate||<3%|
|Voltage Raising Speed||0.5~5 KV/S (adjustable)|
|Standing Time||15min (adjustable)|
|Boosting Interval||5 min (adjustable)|
|Boosting Frequency||1~6 time(s) (optional)|
|Supply Voltage||AC220V±10% 50Hz±1 Hz|