TYA-H is special designed to treat high water content oils such as
lubricant oil, crude oil, engine oil, hydraulic oil, turbine oil,
fuel oil, diesel oil and freezing machine oil, as well as other
lubricant oil which is equipped with a high effective vacuum
dehydration system, with the big capacity to separate a lot of
water from the oil. Can not only remove the mass water, but also
remove the trace water and impurity with a high precision.
1. High water removal and demulsifying capacity. Remove large
amount of water and minimal amount of water
2. Film evaporation and molecule evaporation technology enable
quick demulsifying, and make the turbid and
emulsified oil become limpid and clear.
3. The technology is of a lifetime service (above 20 years), which
avoid the periodic filter replacement, also
reduces the cost of purification and the intensity of work.
4. With strong impurity removing capability, its automatic
back-washing filter element can remove large amount
Table 1 TYA-H Oil dehydrator Technology Standard
|Vacuum degree||Mpa||-0.06 ~- 0.095|
|Flash point(open cup)||℃||GB443-89|
|Note:The data is only for your reference,it will be changed with
changing technical specs|
|Demulsification value||New oil≤15min,running oil≤30min|
|Clean degree||≤3 Grade|
1.After a certain period of running, the machine should be checked
to see whether:
a) The electrical control system is safe and reliable;
b) The temperature controller is sensitive, reliable and accurate;
c) Oil seals of the pump shaft are broken with leakage;
d) There is any blockage with the running system and any abnormal
noise with pumps or related motors;
e) There is any air or oil leakage with the oil running system and
at sealing joints.
2.After each 3000 hours’ running, grease shall be replenished to
prevent motors from being burnt.
3.Special vacuum pump oil or lubricating oil N46 should be used fro
the vacuum pump and oil replaced or replenished if necessary at any
4.If the machine will not be used over 1 month, Place the machine
in a dry environment with the panel door and all valves closed, and
the machine proper protected by a covering.
Please contact for more technical details and latest price:
Skype ID: joanna15023
Email 1: email@example.com
Email 2: firstname.lastname@example.org
Mob: 0086 13983126457 (what's App for online inquiry)
Tel: +86 23 68681154
Fax:+ 86 23 68060921